iboard running board installation instructions

This guide provides step-by-step instructions for installing iBoard running boards. These instructions are designed for most iBoard models and applications, but it’s essential to refer to the specific instructions provided with your iBoard kit for model-specific details and variations.

Introduction

Welcome to the iBoard running board installation guide. iBoard running boards are known for their sleek design, durability, and ease of installation. These instructions will guide you through the process of installing your iBoard running boards, ensuring a smooth and successful installation. Before you begin, it’s crucial to familiarize yourself with the specific components, tools, and procedures outlined in your iBoard kit’s instructions. While these general instructions provide a comprehensive overview, always prioritize the information provided in your specific iBoard kit’s manual for accuracy and model-specific details.

Installing iBoard running boards can enhance the aesthetics of your vehicle, provide convenient step access, and offer added protection for your vehicle’s sides. Whether you’re a seasoned DIY enthusiast or a novice installer, these steps will help you achieve a professional-looking installation.

Take your time, follow the instructions carefully, and consult with a professional if you encounter any difficulties. Remember, a well-installed set of iBoard running boards will not only enhance your vehicle’s appearance but also provide lasting durability and functionality for years to come.

Tools and Materials

Before you begin the installation, ensure you have the necessary tools and materials readily available. This will make the process more efficient and prevent any delays. The specific tools and materials may vary slightly depending on your iBoard model and vehicle, so always refer to your iBoard kit’s instructions for a comprehensive list.

Here are some common tools and materials you’ll likely need⁚

• iBoard Running Board Kit⁚ This includes the running boards, mounting brackets, hardware (bolts, nuts, washers), and installation instructions.
• Socket Wrench Set⁚ A socket wrench set with various sizes will be essential for tightening and loosening bolts.
• Torque Wrench⁚ A torque wrench ensures proper tightening of bolts to avoid over-tightening and damage.
• Phillips Head Screwdriver⁚ A Phillips head screwdriver may be needed for removing or installing certain fasteners.
• Flat-Head Screwdriver⁚ A flat-head screwdriver might be required for removing or installing trim panels or other components.
• Measuring Tape⁚ A measuring tape will be helpful for ensuring proper placement of the mounting brackets.
• Level⁚ A level will help you ensure that the running boards are installed horizontally.
• Protective Gloves⁚ Wear protective gloves to avoid scratches or cuts during the installation process.
• Work Light⁚ A good work light will illuminate the installation area, especially if working in low-light conditions.
• Jack Stands⁚ If necessary, jack stands will provide a secure and stable platform for working underneath your vehicle.

Having these tools and materials readily available will streamline the installation process and ensure a successful outcome.

Preparing the Vehicle

Before you start the installation, it’s essential to prepare your vehicle to ensure a smooth and successful process. Proper preparation will help prevent damage to your vehicle and ensure a secure installation of the iBoard running boards.

Here are the steps to prepare your vehicle⁚

1. Park on a Level Surface⁚ Find a level and stable parking area. This will ensure that the running boards are installed correctly and prevent any issues with unevenness.
2. Apply Parking Brake⁚ Engage the parking brake to secure the vehicle and prevent it from rolling during the installation.
3. Clean the Installation Area⁚ Thoroughly clean the areas where the mounting brackets will be installed. Remove any dirt, debris, or rust using a wire brush or a cleaning solution. This will ensure proper contact and adhesion of the mounting brackets.
4. Locate Mounting Points⁚ Consult your iBoard installation instructions to identify the specific mounting points on your vehicle. These are typically marked on the body panel or frame where the mounting brackets will be attached.
5. Remove Existing Running Boards (If Applicable)⁚ If your vehicle has existing running boards, you’ll need to remove them before installing the iBoard running boards. Carefully remove any screws or bolts securing the existing running boards and detach them from the vehicle.
6. Protect Your Vehicle⁚ Cover any areas around the installation area with a drop cloth or other protective materials to prevent scratches or damage during the process.
7. Gather Your Tools and Materials⁚ Ensure you have all the necessary tools and materials readily available before beginning the installation. This will streamline the process and prevent any delays.

By following these steps, you’ll prepare your vehicle for a successful and safe iBoard running board installation.

Installing the Mounting Brackets

The mounting brackets are the foundation for your iBoard running boards, ensuring a secure and stable installation. Proper installation of these brackets is crucial for the overall strength and longevity of your running boards. The process typically involves aligning and fastening the brackets to pre-determined mounting points on your vehicle’s frame or body panel.

Here’s a general guide on how to install the mounting brackets⁚

1. Identify Mounting Locations⁚ Consult your iBoard installation instructions to locate the specific mounting points on your vehicle. These points are often marked on the body panel or frame using diagrams or labels.
2. Prepare Mounting Points⁚ Clean the mounting points thoroughly using a wire brush or a cleaning solution to remove dirt, debris, or rust. This will ensure a clean and secure connection between the brackets and your vehicle.
3. Align and Position Brackets⁚ Carefully align the mounting brackets with the designated mounting points on your vehicle. Ensure the brackets are positioned correctly and securely before proceeding.
4. Fasten Brackets⁚ Use the provided hardware, such as bolts, nuts, and washers, to securely fasten the mounting brackets to the vehicle. Tighten the fasteners to the manufacturer’s specifications, ensuring a secure and stable connection.
5. Check for Stability⁚ After installing the brackets, gently move and shake them to ensure stability and proper alignment. If any movement is detected, re-tighten the fasteners or adjust the bracket position until it’s secure.

It’s essential to refer to your specific iBoard installation instructions for model-specific details and variations. These may include additional steps or unique hardware requirements for your particular vehicle model.

By carefully following these steps, you’ll ensure that your iBoard mounting brackets are securely installed, providing a solid base for your running boards.

Driver’s Side

Installing the mounting brackets on the driver’s side of your vehicle requires precision and attention to detail. The process typically involves identifying the designated mounting points, aligning the brackets, and securing them with appropriate hardware.

Here’s a step-by-step guide for installing the mounting brackets on the driver’s side⁚

1. Locate Mounting Points⁚ Refer to your iBoard installation instructions to identify the specific mounting points on the driver’s side of your vehicle. These points may vary depending on your vehicle model, but they are typically located along the bottom edge of the body panel or frame.
2. Prepare Mounting Points⁚ Clean the mounting points thoroughly using a wire brush or a cleaning solution to remove dirt, debris, or rust. This ensures a clean and secure connection between the brackets and your vehicle.
3. Align and Position Bracket⁚ Carefully align the driver’s side mounting bracket with the designated mounting points on your vehicle. Ensure that the bracket is positioned correctly and securely before proceeding with the next step.
4. Fasten Bracket⁚ Use the provided hardware, such as bolts, nuts, and washers, to securely fasten the mounting bracket to the vehicle. Tighten the fasteners to the manufacturer’s specifications, ensuring a secure and stable connection.
5. Check for Stability⁚ After installing the bracket, gently move and shake it to ensure stability and proper alignment. If any movement is detected, re-tighten the fasteners or adjust the bracket position until it’s secure.

Remember to refer to your specific iBoard installation instructions for model-specific details and variations. These may include additional steps or unique hardware requirements for your particular vehicle model.

By carefully following these steps, you’ll ensure that the driver’s side mounting bracket is securely installed, providing a solid foundation for the running board.

Passenger’s Side

Installing the mounting brackets on the passenger side of your vehicle is a crucial step in the iBoard running board installation process. This step requires meticulous attention to detail and adherence to the provided instructions to ensure a secure and proper fit. The passenger side installation process mirrors the driver’s side, but there may be slight variations depending on your vehicle model.

Here’s a general guide for installing the mounting brackets on the passenger side⁚

1. Locate Mounting Points⁚ Refer to your iBoard installation instructions to identify the specific mounting points on the passenger side of your vehicle. These points are typically located along the bottom edge of the body panel or frame, mirroring the driver’s side.
2. Prepare Mounting Points⁚ Thoroughly clean the mounting points using a wire brush or a cleaning solution to remove any dirt, debris, or rust. This will ensure a clean and secure connection between the brackets and your vehicle.
3. Align and Position Bracket⁚ Carefully align the passenger side mounting bracket with the designated mounting points on your vehicle. Ensure that the bracket is positioned correctly and securely before proceeding with the next step.
4. Fasten Bracket⁚ Use the provided hardware, such as bolts, nuts, and washers, to securely fasten the mounting bracket to the vehicle. Tighten the fasteners to the manufacturer’s specifications, ensuring a secure and stable connection.
5. Check for Stability⁚ After installing the bracket, gently move and shake it to ensure stability and proper alignment. If any movement is detected, re-tighten the fasteners or adjust the bracket position until it’s secure;

Remember to refer to your specific iBoard installation instructions for model-specific details and variations. These may include additional steps or unique hardware requirements for your particular vehicle model.

By diligently following these steps, you’ll ensure that the passenger side mounting bracket is securely installed, providing a stable foundation for the running board.

Installing the Running Boards

After successfully installing the mounting brackets, you’re ready to install the iBoard running boards themselves. This step involves carefully aligning the running boards with the brackets and securing them with the provided hardware. The installation process should be performed with care and attention to detail to ensure a secure and aesthetically pleasing fit.

Here’s a general guide for installing the iBoard running boards⁚

1. Prepare the Running Boards⁚ Before installing the running boards, ensure that they are clean and free of any debris or protective films. This will help to prevent scratches or damage during installation.
2. Position the Running Boards⁚ Carefully position the running boards over the installed mounting brackets on both the driver’s and passenger’s sides. Ensure that the running boards are aligned with the mounting brackets and that the bottom channels are properly positioned within the brackets.
3. Secure the Running Boards⁚ Use the provided hardware, such as bolts, nuts, and washers, to securely fasten the running boards to the mounting brackets. Tighten the fasteners to the manufacturer’s specifications, ensuring a secure and stable connection.
4. Check for Proper Alignment⁚ Once the running boards are secured, visually check for proper alignment and ensure that they are level. If any misalignment is detected, loosen the fasteners, adjust the position, and re-tighten.
5. Repeat for the Other Side⁚ Repeat steps 2-4 for the other side running board, ensuring a symmetrical and even installation.

After completing the installation, it’s essential to double-check all fasteners for tightness and proper alignment. Ensure that the running boards are securely mounted and that there is no movement or instability.

Remember to refer to your specific iBoard installation instructions for model-specific details and variations. These may include additional steps or unique hardware requirements for your particular vehicle model.

Driver’s Side

Installing the mounting brackets on the driver’s side of the vehicle is a crucial step in the iBoard running board installation process. This involves carefully locating the factory mounting points on the vehicle’s body and securely attaching the brackets using the provided hardware. Precise alignment and proper tightening of the fasteners are essential for a secure and stable installation.

Here’s a step-by-step guide for installing the driver’s side mounting brackets⁚

1. Locate Mounting Points⁚ Start by locating the factory mounting points on the driver’s side of the vehicle. These points are typically located along the bottom and inner side of the body panel. The specific locations and number of mounting points may vary depending on the vehicle model.
2. Prepare Mounting Locations⁚ If the factory mounting points have any protective covers or plugs, remove them to expose the mounting holes. Ensure that the mounting areas are clean and free of debris to prevent interference with the bracket installation.
3. Align and Install the Brackets⁚ Carefully align the driver’s side mounting brackets with the factory mounting points, ensuring that they are positioned correctly and that the holes on the brackets match up with the mounting holes on the vehicle.
4. Secure the Brackets⁚ Use the provided hardware, such as bolts, nuts, and washers, to secure the driver’s side mounting brackets to the vehicle. Tighten the fasteners to the manufacturer’s specifications, ensuring a secure and stable connection.
5. Check for Proper Alignment⁚ Once the brackets are installed, visually check for proper alignment and ensure that they are level. If any misalignment is detected, loosen the fasteners, adjust the position, and re-tighten.

Remember to refer to your specific iBoard installation instructions for model-specific details and variations. These may include additional steps or unique hardware requirements for your particular vehicle model.

Passenger’s Side

After successfully installing the driver’s side mounting brackets, it’s time to tackle the passenger’s side. This process closely mirrors the driver’s side, but there may be slight differences due to vehicle design and the specific location of mounting points. It’s important to carefully follow the instructions provided with your iBoard kit, as they will provide the most accurate information for your vehicle.

Here’s a general guideline for installing the passenger’s side mounting brackets⁚

1. Locate Mounting Points⁚ Begin by locating the factory mounting points on the passenger’s side of the vehicle. These points are typically located along the bottom and inner side of the body panel, similar to the driver’s side. However, the specific locations and number of mounting points may vary depending on your vehicle model.
2. Prepare Mounting Locations⁚ If the factory mounting points have any protective covers or plugs, carefully remove them to expose the mounting holes. Ensure that the mounting areas are clean and free of debris. This will help prevent interference with the bracket installation.
3. Align and Install the Brackets⁚ Carefully align the passenger’s side mounting brackets with the factory mounting points. Ensure that they are positioned correctly and that the holes on the brackets match up with the mounting holes on the vehicle.
4. Secure the Brackets⁚ Use the provided hardware, such as bolts, nuts, and washers, to secure the passenger’s side mounting brackets to the vehicle. Tighten the fasteners to the manufacturer’s specifications, ensuring a secure and stable connection.
5. Check for Proper Alignment⁚ Once the brackets are installed, visually check for proper alignment and ensure that they are level. If any misalignment is detected, loosen the fasteners, adjust the position, and re-tighten.

Remember to refer to your specific iBoard installation instructions for model-specific details and variations. These may include additional steps or unique hardware requirements for your particular vehicle model.

Final Steps

With both running boards securely installed, you’re nearing the end of the installation process. These final steps ensure a smooth and successful completion of the project. It’s crucial to take your time and double-check everything to guarantee a durable and functional setup.

1. Level and Adjust⁚ Once both running boards are in place, check for proper leveling and alignment. You may need to make slight adjustments to the running boards, such as loosening and tightening fasteners to achieve a level and balanced appearance. Ensure that both running boards are parallel to the ground and at a consistent height.
2. Tighten Hardware⁚ After adjusting the running boards, thoroughly tighten all hardware, including bolts, nuts, and washers. Using a torque wrench to tighten fasteners to the manufacturer’s specifications is recommended to ensure a secure and durable connection.
3. Check for Stability⁚ After tightening all hardware, give the running boards a gentle test. Apply some pressure to the running boards to ensure that they are stable and secure. Listen for any loose or rattling sounds, which may indicate loose hardware or misalignment.
4. Protect Your Investment⁚ As a final step, apply a coat of wax or sealant to the running boards. This will help protect the finish from the elements and maintain a polished appearance. Regular cleaning and maintenance will also help preserve the finish and extend the life of your iBoard running boards.

Congratulations! You have successfully installed your iBoard running boards. Now, enjoy the added functionality and enhanced style they bring to your vehicle. Remember to follow the recommended maintenance guidelines to keep your running boards looking their best and performing flawlessly for years to come.